|
 
Brembo
is one of the largest brake component manufacturers in the world. The
company’s strong engineering and technical capabilities allow Brembo to
develop and manufacture ultra-lightweight brake calipers and discs
specifically designed for competition use.
| Winston
Cup Super Speedway Brake System Components |
 |
REAR
BRAKE SYSTEMS:
CALIPER DESCRIPTION
• Two piece caliper body
machined from aluminum alloy billet material
• Different sized pistons for minimal pad taper
• Fitted with aluminum pistons
• Quick release pad retention
• No “off brake” disc drag
• External fluid pipe
CALIPER TECHNICAL
CHARACTERISTICS
| Piston Diameter Size: |
24/28 mm |
|
Pad Area: |
2 x 38 cm2 |
|
Pad Thickness: |
16 mm |
|
Pad Length: |
100 mm |
|
Maximum Disc Diameter: |
278 mm |
|
Disc Thickness: |
16 mm (.625") |
|
Effective Radius (328 mm disc): |
118.2 mm |
|
Minimum Wheel Diameter: |
13" |
|
Maximum Operating Pressure: |
100 bar |
|
Weight (less pads): |
1.8 Kg (3.96 lbs.) |
|
Fluid Capacity (for total pad
wear): |
35.0 cm3 |
REAR CALIPERS
| BRE-X202973 |
Leading Rear, Left
Side |
|
BRE-X202974 |
Leading Rear, Right Side |
|
BRE-X98B923/24 |
This is a new design Rear
Caliper for
Super Speedway Racing. Please Contact
Pro-System for Specifications on this Caliper
and Related Parts. |
REAR CALIPER MOUNTS AND
HARDWARE
| BRE-80007 |
Rear Caliper Bracket |
|
BRE-80087 |
Rear Caliper Stud |
|
BRE-MS6 |
3/8" Rear Caliper Stud Nut |
|
BRE-WS6 |
3/8" Rear Caliper Stud Washer |
REAR ROTORS, HATS AND HARDWARE
| BRE-09521015B |
Rear Rotor, 288 x
16 mm, Bedded |
|
BRE-80200 |
Rear Hat, Lightweight |
|
BRE-X203065 |
Rotor Mounting Bushing, 6 mm
(8 per rotor) |
|
BRE-A10834103 |
Rotor Mounting Screws
(8 per rotor) |
|
BRE-05579320 |
Rotor Mounting Washers
(8 per rotor) |
. |
| REAR CALIPER REPLACEMENT PARTS
LIST |
| BRE-05570210 |
24 mm Piston Seal |
|
BRE-X202996 |
24 mm Aluminum Piston |
| BRE-05570212 |
28 mm Piston Seal |
|
BRE-X202997 |
28 mm Aluminum Piston |
|
BRE-05281213 |
Bleed Screw |
|
BRE-05150220 |
Bleeder Dust Cap |
|
BRE-X404315 |
Pad Retaining Spring Clip |
|
BRE-20455112 |
Spring Clip Bracket |
|
BRE-A12041100 |
Spring Clip Bracket Screw |
|
BRE-20451762 |
Abutment Plate, LH Top or RH Bottom |
. |
| BRE-20451763 |
Abutment Plate, RH Top or LH Bottom |
|
BRE-05442461 |
Abutment Plate Screw |
|
BRE-X901112 |
Bridge Pipe |
|
BRE-06371020 |
Inlet Adapter, M10 x 1 to -3 flare |
|
BRE-06219613 |
Copper Gasket, 10mm |
|
EAR-997631 |
Inlet Banjo Fitting, -3 to 10 mm |
|
BRE-06222842 |
Inlet Banjo Fitting Bolt |
|
|
Click HERE for
Brake Pad Listings
|
____________________________________________________
|
|
